Ultrasonic cleaning machine is an indispensable product in the current cleaning industry. Its appearance solves the cleaning problem, improves the cleaning efficiency of the cleaning industry, and solves the problem of time-consuming and laborious manual cleaning. In many fields, multi tank ultrasonic cleaning machine can be used to clean articles, because the cleaned articles are cleaner than manual cleaning. However, in order to obtain better cleaning quality, in addition to operating various procedures as required, we also need to understand the precautions for using multi slot ultrasonic cleaning machine

一、清洗籃

1、 Cleaning basket

在使用多槽式超聲波清洗機清洗一些較小的零件物品時經常需要使用清洗筐，但是清洗筐上的網眼會引起超聲衰減，所以要特別引起注意，注意選擇網眼大小合適的清洗籃，此外建議選用不銹鋼材質的清洗籃，盡量不要使用塑膠框，這樣能夠防止靜電的產生。

When using the multi slot ultrasonic cleaning machine to clean some small parts and articles, it is often necessary to use the cleaning basket, but the mesh on the cleaning basket will cause ultrasonic attenuation, so special attention should be paid to selecting the cleaning basket with appropriate mesh size. In addition, it is recommended to select the cleaning basket made of stainless steel and try not to use plastic frame, so as to prevent the generation of static electricity.

二、清洗時間

2、 Cleaning time

通常在清洗時每道工序的時間定為三至五分鐘，如果被清洗物品的表面積比較大，或者工件的結構較為復雜時，要注意根據實際情況酌情調整多槽式超聲波清洗機的清洗時間。若被清洗物容易出現重疊以及粘附的現象，那么在將被清洗物放入及取出槽液的時候可以抖動一下工件，讓清洗劑充分與工件接觸以提高清洗效果。

Usually, the time of each process is set at three to five minutes during cleaning. If the surface area of the cleaned object is relatively large or the structure of the workpiece is complex, pay attention to adjust the cleaning time of the multi slot ultrasonic cleaning machine according to the actual situation. If the cleaned objects are prone to overlap and adhesion, shake the workpiece when putting and taking out the cleaned objects into and out of the tank liquid, so that the cleaning agent can fully contact the workpiece to improve the cleaning effect.

三、加液和串槽

3、 Liquid filling and cascade tank

用多槽式超聲波清洗機清洗工件要注意槽液不能加得太滿，以免發生兩槽超聲波清洗劑之間相互混合以及瀝干時清洗筐底部黏液的現象。此外，多槽式超聲波清洗機的每個槽應為獨立的操作工序，注意不要將兩槽清洗劑相互串用或人為減少操作工序以及清洗的操作時間。

When cleaning the workpiece with multi tank ultrasonic cleaning machine, pay attention to that the tank liquid cannot be filled too full, so as to avoid the phenomenon of mixing between the two tanks of ultrasonic cleaning agents and cleaning the mucus at the bottom of the basket when draining. In addition, each tank of the multi tank ultrasonic cleaning machine shall be an independent operation process. Pay attention not to use the two tank cleaning agents in series with each other or artificially reduce the operation process and cleaning operation time.

以上就是今天小編帶給大家的精彩內容，更多精彩內容請點擊我們的網站：超聲波清洗機價格http://www.022dykj.com

The above is the wonderful content that Xiaobian brings to you today. For more wonderful content, please click our website: price of ultrasonic cleaning machine http://www.022dykj.com