The principle of the ultrasonic cleaning machine is to convert the sound energy of the power ultrasonic frequency source into mechanical vibration through the transducer, and radiate the ultrasonic wave into the cleaning solution in the tank through the cleaning tank wall.

超聲波清洗機的功率減弱的原因如下：

The reasons for the power reduction of the ultrasonic cleaning machine are as follows:

超聲波清洗機主要原因是機器設備使用時間過長，變頻調速器逐漸老化，特性降低。維修方式可以選擇提高超聲波輸出功率，但是這種方式的維修治標不治本，很容易使換能器的熱量增加，從而使機器損壞。

The main reason for the ultrasonic cleaning machine is that the machine and equipment have been used for a long time, the frequency converter is aging gradually, and the characteristics are reduced. The maintenance method can choose to increase the ultrasonic output power, but this method can cure the symptoms rather than the root causes, which can easily increase the heat of the transducer and damage the machine.

超聲波清洗機的換能器吸濕受潮，絕緣電阻正常或部分損壞，這種情況下好的選擇還是拆換毀壞的傳感器。其他的原因嗨喲，電纜是不是外部損壞或吸濕，供電電壓過低。超聲波清洗機傳感器不處于脫皮、脫膠狀態，超聲波清洗機的底端不受吸振材料或工件的干擾。環內的電源可以移動其工作點并重新調整工作點。

The transducer of the ultrasonic cleaning machine is hygroscopic and damp, and the insulation resistance is normal or partially damaged. In this case, the best choice is to replace the damaged sensor. For other reasons, the cable is not externally damaged or hygroscopic, and the power supply voltage is too low. The sensor of the ultrasonic cleaning machine is not in the peeling and degumming state, and the bottom end of the ultrasonic cleaning machine is not disturbed by vibration absorbing materials or workpieces. The power supply in the ring can move its operating point and readjust its operating point.

超聲波清洗機如果輸出功率低或減弱，請先檢查傳感器是否有問題。如果無法判斷原因，應停止使用超聲波清洗機，不要再使用。

If the output power of the ultrasonic cleaning machine is low or weakened, please first check whether there is a problem with the sensor. If the cause cannot be determined, stop using the ultrasonic cleaning machine and do not use it again.

超聲波清洗機的功率減弱的原因主要是上面介紹的這些，我們大家都需要懂得我們這種超聲波清洗機的功率減弱的原因。

The main reasons for the power reduction of the ultrasonic cleaning machine are the above. We all need to understand the reasons for the power reduction of our ultrasonic cleaning machine.

本文的精彩內容由全自動超聲波清洗機提供知識提供，本網站還有很多的精彩內容，更多的內容您可以點擊進入:http://www.022dykj.com我們有專門的客服為您解答問題

The wonderful content of this article is provided by the knowledge of automatic ultrasonic cleaning machine. There are many wonderful content on this website. You can click to enter more content: http://www.022dykj.com We have special customer service to answer your questions